Alumina Ceramic lining Tile is of high wear resistance, acid and alkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material; Wear resistance of ceramic is 266 times than that of special manganese, 171.5 times to high chrome cast iron; Hardness is much higher than that of wear-resistant steel and stainless steel.
Application for wear resistant lining: Oil, mining, steel and power industry.
Size Available(mm) for abrasion resistant lining: Length x width x height
10 * 10 * 5/10
17.5 * 17.5 * 4/5/6/7
120 * 80 * 10/12.7/20
110 * 37/34 * 12
130 * 50/47 *12
150 * 60/57 * 12/10
150 * 100 * 50/25.4/12.7/6
100 * 100/50 * 25.4
Trapezoidal Tile: Customized
Heatrotypic Tile: Customized.
Superior wear life in alumina can be attributed to these basic characteristics:
1 Individual alumina grains should be a fine size.
2 Have an even distribution throughout the body.
3 Glass matrix will have no porosity or crystallization.
4 Full adhesion to each alumina grain within the tile.
5 Tile density in relation to AL2O3 content.
6 Matrix components used and mix ratio in combination with firing temperature